Carrying Out A Self Test - Miele K 2601 Vi Operating And Installation Instructions

Carrying out a Self test 
Perform a Self test
refrigeration appliance is not functioning
properly and needs to be checked for
any malfunctions.
 In Settings mode , use the 
and  sensors to select
touch OK to confirm your selection.
 Touch the  sensor if you wish to
terminate the process.
The Self test starts and the appliance is
checked for any faults or malfunctions.
– If the Self test does not detect any
faults or malfunctions, the display will
show the message
– If the Self test does discover any
faults or malfunctions, they are
indicated as error messages in the
display.
An alarm tone also sounds.
 If you find the alarm disruptive, you
can switch it off early by touching the
 sensor.
 Make a note of the error message(s)
displayed.
 Contact customer service and inform
them of the error message(s) in the
display.
 Confirm the message with OK.
System restart will appear in the display.
The appliance will briefly switch off and
then back on automatically.
Self test completed
display.
 Confirm the message with OK.
if you feel that your
Self test
System restart
will appear in the
Selecting further settings
The main screen will appear in the
display.
and
.
65