Advertisement
ACXF55-2303̲OL.ai 10 11/14/2018 10:08:24 AM
ACXF55-2303̲OL.ai 10 11/14/2018 10:08:24 AM
How to use
To select operation mode
AUTO - For your convenience
Unit run with optimised settings.
You can change the temperature according to
your comfort.
COOL - To enjoy cool air
To reduce power consumption during COOL mode,
use curtains to screen off sunlight and outdoor heat.
DRY - To dehumidify the environment
Unit operates at low fan speed to give a gentle
cooling operation.
FAN - To operate Air-Con in "Fan Only" mode
Only indoor unit fan operates as per remote settings.
Outdoor is OFF, so no cooling achieved.
Provides air circulation in the room.
* Indoor unit temp. display will show set temp. for
AUTO,COOL & DRY mode and room temp. for FAN
mode.
C
M
Y
SLEEP /
POWERFUL
CM
MY
CY
CMY
K
To OFF/ON hidden temperature
display
• Press "
• Hidden display is ON by default when unit is switched on.
• When the display is turn OFF by remote controller, It will turn ON automatically for few seconds upon
receiving any command from remote or in case of mains power reset.
10
" button for 5 seconds to switch OFF/ON the hidden temperature display.
C
nanoe-G
PURIFIER
PURIFIER
nanoe-G
SLEEP/
SLEEP/
POWERFUL
POWERFUL
POWER
TIMER
Remote control
nanoe-G
PURIFIER
display
SLEEP /
POWERFUL
FAN
nanoe-G
CHECK
Use when remote control is
misplaced or a malfunction
occurs. Raise the front panel:
• To use in AUTO mode, press
the button once.
• To use in COOL mode, press
and hold the button until 1 beep
is heard, then
release.
• Press the button again to turn off.
Remote control
receiver
(Yellow Green)
(Orange)
(Blue)
(Orange /
Yellow Green)
Press this button for
5 seconds to switch
OFF/ON hidden display.
Press and hold for
approximately
10 seconds to show
temperature setting in
°C or °F.
Press to restore the
remote control to
default setting.
Not used in normal
operations.
Advertisement
