Testing Guidelines - Panasonic CS-WU12VKYF Series Operating Instructions Manual

ACXF55-2248̲OL.ai 14 1/27/2020 7:13:17 PM ACXF55-2248̲OL.ai 14 1/27/2020 7:13:17 PM
BEE Regulation

Testing Guidelines

Cooling Test Mode for Full Load (100%) and
Half Load (50%)
• Turn on the main power supply to unit.
1) Mode
2) Temperature
3) Air Swing
Vertical Airflow
4) Air Swing
Horizontal Airflow
5) Fan speed
• Open the Front Panel by lifting Intake Grille.
• Follow the below Instructions.
Step a): Press and Hold the button on indoor unit.
C Step b): Within 5 second, press once the Remote
M
Y
Step c): After hearing a beep sound from the Indoor
CM
MY
CY
CMY
K
14
: Select 'COOL'
: a) 16 ºC for Full Load (100%)
: b) 17 ºC for Half Load (50%)
: Set vane position to 3rd step
from top
: Set vane position to be
straight
: Maximum
Control button when display is showing
OFF, while holding the indoor unit button.
Unit, immediately release the (Auto OFF/ON)
button on Indoor Unit.
All this should be done within 5 seconds.
POWER
TIMER
nanoe-G
PURIFIER
SLEEP /
POWERFUL
(Indication for Full load)
THREE LEDs FROM BOTTOM
STARTS BLINKING
(For applicable Model)
(Auto OFF/ON Button)
POWER
TIMER
nanoe-G
PURIFIER
SLEEP /
POWERFUL
(Indication for Half load)
TWO LEDs FROM BOTTOM
STARTS BLINKING
QUIET
CLEAN
1
2
1
2
(For Full Load)
QUIET
CLEAN
1
2
1
2
(For Half Load)