Advertisement
ACXF55-1900̲OL.ai 6 6/1/2018 12:14:31 PM
ACXF55-1900̲OL.ai 6 6/1/2018 12:14:31 PM
How to use
To select operation mode
AUTO - For your convenience
Unit will select a standard temperature
of 25 °C.
Fan speed and swings will operate in Auto mode.
You can change the temperature according to
your comfort.
COOL - To enjoy cool air
To reduce power consumption during COOL mode,
use curtains to screen off sunlight and outdoor heat.
DRY - To dehumidify the environment
Unit operates at low fan speed to give a gentle
cooling operation.
FAN - To operate Air-Con in "Fan Only" mode
Unit operates without running compressor with
Indoor unit fan running as per remote setting fan
speed and air flow direction.
To maximise comfort while
sleeping
SLEEP /
POWERFUL
• This operation provides you with a comfortable
environment while sleeping by gradually increase
the set temperature 1 °C after every 3 hours operation.
• The unit is turned off after 8 hours.
• Can be cancelled by pressing the respective
button again.
POWERFUL/
To switch between POWERFUL
QUIET
and QUIET mode
POWERFUL: To reach set temperature quickly
SLEEP /
POWERFUL
• This operation stops automatically after 1 hours.
QUIET: To enjoy quiet operation
• This operation reduces airflow noise.
To adjust horizontal airflow direction
• Manually adjustable.
6
nanoe-G
nanoe-G
PURIFIER
PURIFIER
SLEEP/
POWERFUL
POWERFUL
SLEEP/
POWER
TIMER
Remote control
nanoe-G
PURIFIER
display
SLEEP /
POWERFUL
nanoe-G
Press and hold for
approximately
10 seconds to show
temperature setting in
POWERFUL/
QUIET
°C or °F.
Press to restore the
remote control to
default setting.
Not used in normal
operations.
Auto OFF/ON button
Use when remote control is
misplaced or a malfunction
occurs. Raise the front panel:
• To use in AUTO mode, press
the button once.
• To use in COOL mode, press
and hold the button until 1 beep
is heard, then release.
• Press the button again to turn
off.
Remote control
receiver
(Yellow Green)
(Orange)
(Blue)
(Orange /
Yellow Green)
Advertisement
