Table of Contents
Advertisement
5. Plug in the headset as shown in figure 3.
6. Turn the Roady2 Personal Audio System on by sliding the mode
switch to FM or XM as shown in figure 4. If the display is not on,
see "Troubleshooting" on page 15. Note: The display on the Roady2
only appears if you are in XM mode.
Caution: Take care not to accidentally bump the mode switch when the unit is off;
accidentally turning it on could run down the battery.
Figure 3.
Figure 4.
Mode switch
Advertisement
Table of Contents
Need help?
Do you have a question about the Roady 2 SA10109-11P1 and is the answer not in the manual?