Turning Extraction On And Off In Auto Mode; Turning Extraction On And Off In Manual Mode - Novy Pure'line Pro Compact 6910 User Manual

2.3 Turning extraction on and off in auto mode

Switching on the extraction in auto mode
To switch on the motor, press the
The cooker hood will switch on in auto mode.
The optimum speed level is set automatically using the
Novy Sense sensor.
− Three white indicator leds
sition one to three.
− The fourth white indication led
position. Power position is only used in case of strong
development of odour, smoke or vapour.
− Power mode automatically reverts to speed three after
6 minutes.
− The illuminated indication led shows the current motor
speed.
− The white indicator leds flash alternately to show that
the auto mode is active.


The auto mode only works optimally if the
cooker hood is switched on in auto mode be-
fore the cooking process begins. If the cooker
hood is only switched on during the cooking
process, this has a negative effect on the auto-
matic speed control. Because the cooking pro-
cess is already in progress (and therefore there
are already vapours and odours), it is possible
that the cooker hood switches too slowly to a
higher or lower speed.
Switching extraction off with delay mode
To set delay mode press button
switches to mood mode and the first white LED for the
speed level flashes.
The engine continues to run for 10 minutes in delay mode.
After this time, the motor
will switch off. The lighting will remain on in the mood mode.
Switching extraction off without delay mode
Press button twice.


If, during the cooking process, the cooker
hood is switched off in auto mode by pressing
the button twice and then restarted in auto
mode, then the sensor value is determined
again. Because the cooking process is already
in progress (and therefore there are already va-
pours and odours), it is possible that the cooker
hood switches too slowly to a higher or lower
speed level.
Switching from auto mode to manual mode
If the cooker hood is in auto mode, auto mode can be
switched off by pressing the
hood then operates in manual mode.
If you want to return to auto mode while cooking, we rec-
ommend doing this via the Novy Connect application. This
prevents the sensor value from being determined again.
on the remote control.
indicate speed level po-
A
indicates the Power
B
once. The lighting
or button. The cooker
Auto-Stop
As soon as the sensor detects no more change in the air
quality in the room, the auto mode automatically changes to
manual mode and Auto-Stop is activated at the same time.
Auto-Stop ensures that the motor of the cooker hood switch-
es off automatically after 3 hours, thereby contributing to
energy savings. Only the motor will turn off automatically.
The lighting will remain on in the mood mode.

2.4 Turning extraction on and off in manual mode

Switching on the extraction in manual mode
To switch on the motor, press the
control. The cooker hood will switch on in manual mode.
− Three white indicator leds
position one to three.
− The fourth white indication led
position. Power position is only used in case of strong
development of odour, smoke or vapour. Taking into ac-
count the large air volume in this position, usage should
be kept to a minimum.
− Power mode automatically reverts to speed three after
6 minutes.
− The illuminated indication led shows the current motor
speed.
Motor speed
In order to increase the speed of the motor, press the but-
ton. In order to decrease the speed, press the
The motor speed can be set to 4 speeds. You can select
the required position depending on the vapour production
while cooking.
Switching extraction off with delay mode
To set delay mode press button
The lighting switches to mood mode and the first white
LED for the speed level flashes.
The engine continues to run for 10 minutes in post-venti-
lation mode. After this time, the motor
will switch off. The lighting will remain on in the mood mode.
Switching extraction off without delay mode
Press button twice.
Auto-Stop
To prevent the cooker hood from being left on, the motor is
automatically switched off after 3 hours (only if the control
has not been changed during the 3 hours).
The lighting will remain on in mood mode.


The motor has a thermal switch that switches
the motor off with overheating. After cooling
the motor will switch on again. Determining the
cause of overheating is required. This can be
caused for example by a pan fire, the impeller
motor being blocked or an object getting in the
exhaust opening and causing it to be partly or
fully blocked.
– 36 –
button on the remote
indicate speed level
A
indicates the Power
B
button.
once.