MB QUART JC1-108 Assembly Instructions

MB QUART JC1-108 Assembly Instructions

Top dash speaker install

Advertisement

Assembly Instructions
Model:
Description:
Part Number:
Assembly Time:
Before you beign, read thought these instructions and check that
all parts are present. Please note that MB Quart cannot assume any
responsibility for damage resulting from incorrect installation.
No.
1
3.5in Coaxial Speakers
1
Bojo or Panel Tool
2
Philips Screwdriver
3
8, 10, 13mm Socket
4
Rachet
Jeep JL (Wrangler) & JT (Gladiator)
JC1-108
30 Min

Parts List

Component Name

Tools Required

Page 1 of 4
Parts List
Qty
2

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the JC1-108 and is the answer not in the manual?

Questions and answers

Summary of Contents for MB QUART JC1-108

  • Page 1 Part Number: 30 Min Assembly Time: Before you beign, read thought these instructions and check that all parts are present. Please note that MB Quart cannot assume any responsibility for damage resulting from incorrect installation. Parts List Parts List Component Name 3.5in Coaxial Speakers...
  • Page 2 Top Dash Speaker ● Unclip and remove dash grill ● Remove (2) Phillips screws, disconnect wiring and remove speaker from vehicle ● Connect the factory wires to the speaker Page 2 of 4...
  • Page 3 Top Dash Speaker Install ● Install speaker with (2) Phillips screws ● Clip top dash grill into place Page 3 of 4...
  • Page 4 This equipment complied with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. JC1-108 REV 01 Page 4 of 4...

Table of Contents