Table of Contents
Advertisement
en Cleaning function EcoClean
Do not use oven cleaner or abrasive cleaning aids.
▶
If oven cleaner accidentally comes into contact with
the self-cleaning surfaces, dab it off immediately us-
ing water and a sponge cloth. Do not rub.
16 Cleaning function EcoClean
Use the cleaning function "EcoClean" regularly to help
retain the cleaning ability of the self-cleaning surfaces
and prevent damage.
The self-cleaning surfaces in the cooking compartment
are coated with a porous, matt ceramic layer and have
a rough surface. When the appliance is in operation,
the self-cleaning surfaces absorb splashes from roast-
ing or grilling and break them down.
The following surfaces are self-cleaning:
¡ Back wall
¡ Ceiling
¡ Side walls
ATTENTION!
If you do not clean the self-cleaning surfaces regularly,
they may become damaged.
If dark stains are visible on the self-cleaning sur-
▶
faces, use the cleaning function to clean the cook-
ing compartment.
If a prompt to clean appears in the display, use the
▶
cleaning function to clean the cooking compart-
ment.
Do not use oven cleaner or abrasive cleaning aids.
▶
If oven cleaner accidentally comes into contact with
the self-cleaning surfaces, dab it off immediately us-
ing water and a sponge cloth. Do not rub.
16.1 Cleaning recommendation
The appliance records the type and duration of the op-
eration and, if required, recommends which cleaning
function to use.
When you switch on the appliance, a notification ap-
pears in the display stating that you should use the
cleaning function. Start the cleaning function as soon
as possible.
You can use your appliance as normal. However, the
cleaning setting appears in the display until you have
run the cleaning function in full.
Note: If the appliance is prematurely contaminated, e.g.
by greasy poultry or roasts, or if dark spots appear on
the self-cleaning surfaces, do not wait until the notifica-
tion appears in the display before you use the cleaning
functions. The more often you use the cleaning func-
tion, the longer the cleaning ability of the self-cleaning
surfaces is retained.
18
Use the cleaning function.
▶
→ "Cleaning function EcoClean", Page 18
16.2 Preparing the appliance for the
cleaning function
In order to achieve a good cleaning result, prepare the
appliance carefully.
ATTENTION!
Using oven cleaner on the self-cleaning surfaces dam-
ages the surfaces.
Do not use oven cleaner on the self-cleaning sur-
▶
faces. If oven cleaner does get onto these surfaces,
dab it off immediately using water and a sponge
cloth. Do not rub the surface and do not use abras-
ive cleaning aids.
Remove accessories and cookware from the cook-
1.
ing compartment.
Detach the shelf supports and remove them from
2.
the cooking compartment.
→ "Rails", Page 19
Remove coarse dirt using soapy water and a soft
3.
cloth:
– From the cooking compartment floor
– From the inside of the appliance door
– From the glass cover on the oven light
This prevents stains that cannot be removed.
Remove any objects from the cooking compartment.
4.
The cooking compartment must be empty.
16.3 Setting the cleaning function
Ventilate the kitchen while the cleaning function is run-
ning.
WARNING ‒ Risk of burns!
The outside of the appliance gets very hot when the
cleaning function is in progress.
Never touch the appliance door.
▶
Allow the appliance to cool down.
▶
Keep children at a safe distance.
▶
Requirement: → "Preparing the appliance for the
cleaning function", Page 18.
Press
.
1.
a The duration appears in the display. The duration of
one hour cannot be changed.
Press .
2.
a A notification stating that you should carry out the
necessary preparatory work for the cleaning func-
tion appears in the display.
3.
Press
to start.
Note: Do not open the appliance door while the
cleaning function is running. The cleaning result
would no longer be correct and the operation is in-
terrupted.
a The cleaning function starts and the duration counts
down. The heating line does not appear.
Advertisement
Table of Contents
