Table of Contents
Advertisement
Use the control ring to reset the duration of the
2.
timer to zero.
Press
to confirm.
3.
a The red symbol goes out.
10.3 Setting the cooking time
You can set a cooking time for operation of up to 23
hours 59 minutes.
Requirement: An operating mode and temperature or
setting have been set.
Press
.
1.
a The symbol lights up red.
Use the control ring to set the cooking time.
2.
Direction of rotation
Left
Right
The cooking time can be set in one-minute incre-
ments up to one hour, and then in five-minute incre-
ments. The end time is calculated automatically.
Press
to start.
3.
a The appliance starts to heat and the cooking time
counts down.
a When the time has elapsed, a signal sounds. The
time shown in the display is zero.
When the cooking time has elapsed:
4.
To stop the signal early, press any touch field.
‒
To set another cooking time, press
‒
the control ring to set the time.
To continue without setting a cooking time, press
‒
to start.
When the food is ready, press
‒
appliance off.
Changing the cooking time
You can change the cooking time at any time.
1.
Press
.
Use the control ring to change the cooking time.
2.
Press
to confirm.
3.
Cancelling the cooking time
You can cancel the cooking time at any time.
Press
.
1.
Use the control ring to reset the cooking time to
2.
zero.
Press
to confirm.
3.
To continue without setting a cooking time, press
‒
to start.
Default value
10 minutes
30 minutes
and use
to switch the
10.4 Setting the end time
You can delay the time at which cooking is due to fin-
ish by up to 23 hours and 59 minutes.
Notes
¡ In order to achieve a good cooking result, do not
delay the end time once the appliance is already in
operation.
¡ Food will spoil if you leave it in the cooking com-
partment for too long.
Requirements
¡ An operating mode and temperature or setting have
been set.
¡ A cooking time is set.
1.
Press
again.
Use the control ring to delay the end time.
2.
Press
to start.
3.
a The display shows the start time. The appliance is in
standby mode.
a Once the start time has been reached, the appli-
ance starts to heat up and the cooking time starts
counting down.
a When the time has elapsed, a signal sounds. The
time shown in the display is zero.
When the cooking time has elapsed:
4.
To stop the signal early, press any touch field.
‒
To set another cooking time, press
‒
the control ring to set the time.
To continue without setting a cooking time, press
‒
to start.
When the food is ready, press
‒
appliance off.
Changing the end time
In order to achieve a good cooking result, only change
the set end time before operation starts and the cook-
ing time is counting down.
1.
Press
to pause operation.
Press
twice.
2.
Use the control ring to change the end time.
3.
Press
to continue operation.
4.
Cancelling the end time
You can delete the set end at any time.
Press
to pause operation.
1.
Press
twice.
2.
Use the control ring to reset the end time to zero.
3.
Press
to continue operation.
4.
a The appliance starts to heat and the cooking time
counts down.
Time-setting options en
and use
to switch the
13
Advertisement
Table of Contents
