Table of Contents
Advertisement
15
Hob-based hood control
If both appliances are Home Connect-compatible, the
easiest way to connect the appliances is in the
Home Connect app. To do this, connect the two appli-
ances to Home Connect and follow the instructions in
the app.
Alternatively, you have the following options for
connecting the appliances together:
¡ "Connect appliances together directly." → Page 17
¡ "Connect appliances via the Wi-Fi home network."
→ Page 17
15.1 Connecting appliances together
directly
Connect the appliance directly to your extractor hood
to control the hood via the hob. A connection to the
home network and the app is no longer possible for
both appliances.
Note: Note the information for connecting the hob in
the instruction manual for your extractor hood.
Requirement: The extractor hood is switched off.
Switch on the hob.
1.
Press and hold
for 4 seconds.
2.
a The display will show the product information.
Touch
repeatedly until the display alternately
3.
shows
and .
lights up in the hotplate display.
a
Set the value
on the control panel.
4.
flashes on the hotplate display.
a
You now have two minutes to start the connection
5.
process on the extractor hood.
a Once the connection has been established,
up on the cooking zone display.
Exit the basic settings.
6.
a The control panel shows the symbols for hob-based
hood control.
15.2 Connecting appliances via the WLAN
home network (Wi-Fi)
Connect the appliances via Wi-Fi in order to control the
extractor hood via the hob. It is also possible to con-
nect to the Home Connect app.
Note: The appliances can only be connected when
both are connected to the home network and are sim-
ultaneously engaged in connecting. If the time allowed
for connecting has already expired for one of the two
appliances, start the connection process again.
Requirements
¡ Your router has a WPS button. You will find informa-
tion about this in the manual for your router.
¡ The extractor hood is connected to the WLAN home
network (Wi-Fi).
Switch on the hob.
1.
Press and hold
for 4 seconds.
2.
a The display will show the product information.
Touch
repeatedly until the display alternately
3.
shows
and .
(not connected) or
a
network (Wi-Fi) ) lights up on the cooking zone dis-
play.
lights
(connected to WLAN home
Set the value
on the control panel.
4.
flashes on the hotplate display.
a
If the appliance has not yet been connected to the
5.
WLAN home network (Wi-Fi) , press the WPS button
on the router within the next two minutes.
a The hob connects to the WLAN home network
(Wi-Fi) , and
lights up on the cooking zone dis-
play. The hob then automatically starts connecting
to the extractor hood.
You now have two minutes to start the connection
6.
process on the extractor hood.
a Once the connection has been established,
up on the cooking zone display.
Exit the basic settings.
7.
a The control panel shows the symbols for hob-based
hood control.
15.3 Resetting Home Connect settings
If you have problems connecting your appliance to the
WLAN home network (Wi-Fi) or if you want to log your
appliance onto a different WLAN home network (Wi-Fi) ,
you can reset the Home Connect settings.
Note: If you reset the Home Connect settings, the con-
nection to any extractor hood will also be terminated.
Press and hold
for 4 seconds.
1.
a The display will show the product information.
Touch
repeatedly until the display alternately
2.
shows
and .
Set the value
on the control panel.
3.
15.4 Controlling the hood via the hob
You can change the behaviour of your extractor hood
in the basic settings of your hob, depending on switch-
on/off of the hob or individual cooking zones.
You can select other settings using the controls on the
hob.
Setting the fan
Touch
.
1.
Select a fan setting on the control panel.
2.
You can choose between the levels 1, 2 and 3.
To select an intensive setting, touch 4 or 5 on the
control panel. Alternatively, you can repeatedly
touch
until the required intensive setting is dis-
played.
Switching off the fan
Select the fan setting 0 on the control panel.
▶
Switching on automatic mode
Press and hold
until the display shows .
▶
a The fan will start automatically when steam is pro-
duced.
Switching off automatic mode
Press and hold
until
▶
Automatic mode will also end if you select a differ-
ent fan setting.
Setting the hood lighting
You can switch the hood lighting on and off using the
control panel of the hob.
Hob-based hood control en
lights
goes out.
17
Advertisement
Table of Contents
