Table of Contents
Advertisement
en Hob-based hood control
Hob-based hood control
20 Hob-based hood control
If the hob and the extractor hood are Home Connect-
compatible, connect the appliances in the Home Con-
nect app. To do this, connect the two appliances to
Home Connect and follow the instructions in the app.
Notes
¡ Using the controls on the extractor hood always
takes priority. It is not possible to use the hob-based
hood control during this time.
¡ You can only connect to the extractor hood via the
Home Connect app. Other connection routes are no
longer supported.
20.1 Controlling the extractor hood via the
hob
In the basic settings for your hob, you can adjust the
behaviour of your extractor hood depending on
whether the hob or individual cooking zones are
switched on or off.
You can select other settings using the controls on the
hob.
Note: If you cannot find these settings for your hob,
check the settings of the extractor hood in the
Home Connect app to configure the connection.
Connecting the fan
In order to set the hood from the hob, you must first
▶
assign the hood function to Favourite button.
→ "Favourite button", Page 10
If you assign the hood function , you can choose
between setting the fan, automatic mode or the
hood lighting.
Setting the fan
Requirement: The function is assigned to Favourite
button.
20.2 Overview of the hood control settings
In the basic settings for your hob, depending on the extractor hood model, you can adjust the behaviour of your ex-
tractor hood depending on whether the hob or individual cooking zones are switched on or off. If you cannot find
these settings for your hob, check the settings of the extractor hood in the Home Connect app to configure the con-
nection. The display shows this setting only when the appliance has been connected to the extractor hood.
Indicator
Setting
Setting for whether and how the fan switches on
automatically.
Setting for whether and how the fan is to run on
after switching off the hob.
1
Factory setting
Depending on the appliance specifications
2
16
Press
.
1.
Select the required setting in the settings area.
2.
You can select the following settings:
Note: Available depending on extractor hood model.
a The fan is switched on.
Press
to switch off the fan.
3.
Switching on automatic mode
You can set automatic mode using the hob's control
panel.
Requirement: The function is assigned to Favourite
button.
To switch on automatic mode, press
1.
To switch off automatic mode, press
2.
Setting the hood lighting
You can switch the hood light on and off using the
hob's control panel.
Requirement: The function is assigned to Favourite
button.
To switch the lighting on, press
1.
To switch the lighting off, press
2.
Value
Automatic fan start-up
– Switched off. The extractor hood must be
switched on manually, if required.
– Switched on in manual mode. The extractor
hood is switched on at a specified setting when a
cooking zone is switched on.
1,
– Switched on in automatic mode. In auto-
matic mode, the extractor hood switches itself on
when one of the cooking zones is switched on.
Fan run-on
– Fan switches off when the hob is switched off
– Switched on with standard fan run-on
– No change to the settings
1,
– Switched on in automatic mode
Fan off
Fan setting 1
Fan setting 2
Fan setting 3
Intensive mode 1
Intensive mode 2
Automatic mode
.
.
.
again.
2
2
Advertisement
Table of Contents
