Wickes 223734 Manual page 11

OPERATION
1. ON/OFF SWITCH (SEE FIG. C)
To switch on the machine, slide the on/off switch
backward to the rear to the "I" mark.
To switch off the machine, slide the on/off switch forward
to the "O" mark.
2. USING THE VARIABLE SPEED CONTROL
(SEE FIG. D)
Select oscillation frequency (speed) while the motor is
running.
The variable speed control can be used to set the
optimum oscillating frequency according to the
accessories used and the respective application.
High oscillation frequency: Sanding, sawing, rasping and
polishing stone and metal.
Low oscillation frequency: Polishing varnishes.
3. SELECTING A BLADE (SEE FIG. E)
Refer to Fig. E for the applicable blade (relate to the fitting
hole pattern) for your machine.
NOTE: Please observe the accessories intended for
your machine. Do not attempt to use accessories that
are incompatible
OFF
ON
Fig. C
Fig. D
Fig. E
11