Wickes PHG200B Quick Start Manual

Wickes PHG200B Quick Start Manual

Hot air gun 2000w

Advertisement

Quick Links

HOT AIR GUN
2000W
PHG200B
223737

Advertisement

Table of Contents
loading

Summary of Contents for Wickes PHG200B

  • Page 1 HOT AIR GUN 2000W PHG200B 223737...
  • Page 2: Table Of Contents

    CONTENTS GENERAL POWER TOOL SAFETY WARNINGS ADDITIONAL SAFETY INSTRUCTIONS FOR YOUR HEAT GUN COMPONENT LIST ACCESSORIES SYMBOLS TECHNICAL DATA OPERATING INSTRUCTIONS MAINTENANCE TROUBLESHOOTING PLUG REPLACEMENT (ONLY FOR REWIRABLE PLUG OF UK & IRELAND) DECLARATION OF CONFORMITY...
  • Page 3: General Power Tool Safety Warnings

    GENERAL POWER TOOL SAFETY WARNINGS WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
  • Page 4: Component List

    COMPONENT LIST Scraper Nozzle Concentration nozzle Heat protection Glass protection nozzle Main body Hook nozzle Cool air inlet Flat nozzle On/off switch / Air flow and temperature regulator AC Mains Lead ACCESSORIES Scraper Glass protection nozzle Flat nozzle Hook nozzle Concentration nozzle We recommend that you purchase your accessories from the same store that sold you the tool.
  • Page 5: Symbols

    SYMBOLS Wear dust mask Read the manual Warning Double insulated Wear ear protection Waste electrical products must not be disposed of with household waste. Please recycle where facilities exist. Check with your local authorities or retailer for recycling Wear eye protection advice.
  • Page 6: Operating Instructions

    OPERATING INSTRUCTIONS NOTE: Before using the tool, read the instruction book carefully. Intended Use The unit is intended for the forming and welding of plastic, removal of paint and warming of heat-shrinkable tubing. It is also suitable for soldering and tinning, loosening of adhesive joints and the defrosting of water lines. BEFORE USING THE TOOL Before starting the job it is advisable to test the workpiece for the ideal temperature to use.
  • Page 7 1) CONCENTRATION NOZZLE (See Fig. A) This nozzle directs a concentrated heat flow to the workpiece. It is ideal for use when removing paint in awkward corners, crevices, mouldings, beading, architraves or whenever precise paint removal is required. Fig. A 2) FLAT NOZZLE (See Fig.
  • Page 8 5) SCRAPER (See Fig. E) Take the handle from the set, remove the nut from the end, and fit the triangle blade in place by refitting and tightening the nut. The triangular scraper is ideal for stripping paint from flat wooden surface and edges. Remember to clean the blade after use with wire wool and lightly oil before storing.
  • Page 9: Maintenance

    8. SHRINK SLEEVING ELECTRICAL CABLES Choose the Hook nozzle and fit over heat outlet. Select a heat-shrinkable sleeve with a diameter matching that of the workpiece. Evenly heat the sleeve. 9. BENDING PLASTIC TUBE Choose the Hook nozzle and fit over heat outlet. Turn the gun upside down and place on its clip stand so that it is resting on a secure bench with the nozzle pointing upwards, see picture.
  • Page 10: Plug Replacement (Only For Rewirable Plug Of Uk & Ireland)

    PLUG REPLACEMENT (ONLY FOR REWIRABLE PLUG OF UK & IRELAND) If you need to replace the fitted plug then follow the instructions below. IMPORTANT The wires in the mains lead are colored in accordance with the following code: Blue = Neutral Brown = Live As the colors of the wires in the mains lead of this appliance may not correspond with the colored markings identifying the terminals in your plug, proceed as follows.
  • Page 11: Declaration Of Conformity

    DECLARATION OF CONFORMITY Wickes Building Supplies Limited Declare that this product: HOT AIR GUN Description and SKU code: 223737 Complies with the following Directives and Regulations: 2014/30/EU, Electromagnetic Compatibility Directive 2011/65/EU & (EU)2015/863, Restriction of Hazardous Substances Directive 2014/35/EU, Low Voltage Directive...
  • Page 12 Customer Helpline 0345 2005409...

This manual is also suitable for:

223737

Table of Contents