Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Wickes 223734
Summary of Contents for Wickes 223734
- Page 1 MULTI TOOL 300W PMF300G 223734...
-
Page 2: Table Of Contents
CONTENTS GENERAL POWER TOOL SAFETY WARNINGS COMPONENT LIST ACCESSORIES SYMBOLS TECHNICAL DATA NOISE INFORMATION OPERATING INSTRUCTIONS WORKING HINTS FOR YOUR SANDER MAINTENANCE APPLICATION ENVIRONMENTAL PROTECTION DECLARATION OF CONFORMITY... -
Page 3: General Power Tool Safety Warnings
ORIGINAL INSTRUCTION GENERAL POWER TOOL SAFETY WARNINGS WARNING! Read all safety warnings, 3. PERSONAL SAFETY a) Stay alert, watch what you are doing and use instructions, illustrations and specifications provided with this power tool. Failure to follow all common sense when operating a power tool. instructions listed below may result in electric shock, fire Do not use a power tool while you are tired and/or serious injury. - Page 4 GENERAL POWER TOOL SAFETY WARNINGS or remove the battery pack, if detachable, from maintained cutting tools with sharp cutting edges are the power tool before making any adjustments, less likely to bind and are easier to control. changing accessories, or storing power tools. g) Use the power tool, accessories and tool bits Such preventive safety measures reduce the risk of etc.
-
Page 5: Component List
COMPONENT LIST On/Off switch Sanding paper Variable speed control Sanding pad Locking bolt Semicircle saw blade Wood cutting blade Flange Metal cutting blade Hex key Rigid scraping blade... -
Page 6: Accessories
ACCESSORIES Hex key Semicircle saw blade (85mm) Wood cutting blade (35mm) Metal cutting blade (35mm, Bi-metal) Rigid scraping blade Sanding pad Sanding paper (80 grit) Sanding paper (120 grit) Sanding paper (180 grit) We recommend that you purchase your accessories from the same store that sold you the tool. Refer to the accessory packaging for further details. -
Page 7: Technical Data
TECHNICAL DATA Voltage 230-240V~50Hz Power input 300W No load speed 15000-22000/min Oscillations angle 3.2° Machine weight 1.27kg Protection class NOISE INFORMATION A weighted sound pressure : 84 dB(A) A weighted sound power : 95 dB(A) & K 3.0 dB(A) Wear ear protection. - Page 8 VIBRATION INFORMATION Vibration total values (triax vector sum) determined according to EN 62841: = 3.55 m/s² Vibration emission value Uncertainty K = 1.5 m/s² The declared vibration total value and the declared noise emission value have been measured in accordance with a standard test method and may be used for comparing one tool with another.
-
Page 9: Operating Instructions
OPERATING INSTRUCTIONS NOTE: Before using the tool, read the instruction book carefully. Intended Use The power tool is intended for sawing and separating wooden materials, plastic, plaster, non-ferrous metals and fasteners (e.g. nails and clamps) as well as for working on soft wall tiles and for dry grinding of small surfaces. It is especially suitable for working close to edges and for flush cutting. - Page 10 Fig. A3 Fig. A4 Fig. A5 Fig. A6 2. MOUNTING THE SANDING PAPER (SEE FIG. B1, 1) Mount the sanding pad following the steps of mounting the end cut blade. 2) Align the sanding paper and press it onto the sanding pad by hand.
- Page 11 OPERATION 1. ON/OFF SWITCH (SEE FIG. C) To switch on the machine, slide the on/off switch backward to the rear to the “I” mark. To switch off the machine, slide the on/off switch forward to the “O” mark. Fig. C 2.
-
Page 12: Working Hints For Your Sander
WORKING HINTS FOR YOUR TOOL 1. If your power tool becomes too hot, especially when used at low speed, set the speed to maximum and run it with no load for 2-3 minutes to cool the motor. Avoid prolonged usage at very low speeds. Always keep the blade sharp. 2. -
Page 13: Application
APPLICATION Warning: The sawing teeth are very sharp. Do not touch during mounting and application. The workpiece must be clamped tightly before it is cut. Description Application Universal Metal/Wood End Cut Wood, plastic, fiberglass, nails, non- Blade ferrous metals, thin sheet metal, hardened fillers Standard Wood End Cut Blade Wood, plastic, drywall... -
Page 14: Environmental Protection
ENVIRONMENTAL PROTECTION Waste electrical products must not be disposed of with household waste. Please recycle where facilities exist. Check with your local authorities or retailer for recycling advice. PLUG REPLACEMENT (ONLY FOR REWIRABLE PLUG OF UK & IRELAND) If you need to replace the fitted plug then follow the instructions below. IMPORTANT The wires in the mains lead are colored in accordance with the following code: Blue = Neutral... -
Page 15: Declaration Of Conformity
DECLARATION OF CONFORMITY Wickes Building Supplies Limited Declare that this product: MULTI TOOL Description and SKU code: 223734 Complies with the following Directives and Regulations: 2006/42/EC, Machinery Directive 2014/30/EU, Electromagnetic Compatibility Directive 2011/65/EU & (EU)2015/863 (RoHS), Restriction of Hazardous Substances Directive... - Page 16 Customer Helpline 0345 2005409...