Dell PowerVault 530F Software Update page 9

255.255.255.0. For information about setting up the VNC connection, see "Getting
Started" in the PowerVault 530F System Administrator's Guide.
If you have PowerVault 660F storage systems attached to a PowerVault 530F, perform
6
the following steps to restore the primary and failover path information:
Access the SAN Appliance Menu from an attached keyboard/video/mouse or a
a
VNC connection.
From the main menu, click Applications—> QLogic Config Utility.
b
From the QL-Config menu, click Connect.
c
When connected, click Machine Configuration.
d
Restore the primary and failover paths you recorded in step 2. (Right-click a path
e
entry to select its role.)
If you have PowerVault 650F storage units attached to a PowerVault 530F, perform the
7
following steps to perform a low-level configuration:
Access the SAN Appliance Menu from an attached keyboard/video/mouse.
a
From the main menu, click Applications—> Data Agent.
b
Click the Devices menu item, and then click Auto Detect.
c
The Data Agent automatically detects any attached PowerVault 650F storage
units.
In the Privileged Users section, enter the previously recorded Privileged Users
d
information.
Click File/Save to save the configuration, and then click Yes to restart the Data
e
Agent.
From the PowerVault 530F main menu, click System Settings—> Network
f
Properties.
Click the Change box, enter the Computer Name for this PowerVault 530F, and
g
click OK to save.
Click the Protocols tab, and then click Properties.
h
Enter the previously recorded IP address and subnet mask for both adapters.
i
(Click the down arrow on the right end of the Adapters box to select the Gigabit
Ethernet adapter.)
When complete, the system shuts down and restarts.
j
U p g ra d i n g Yo u r S ys te m S o f t war e 1-7