Demtech Pro-Tester Double-Pull Operator's Manual page 11

Rev. C, October 2020
a. Liquid Crystal Display (LCD): The LCD is a 40 Character by 4 Line display device
which provides main system operation information for the Control Panel. It provides
all key operating information and allows the user to input various system settings.
b. JOG / : This switch allows the user to jog (move) the movable sample grips at an
accelerated rate in and out during setup and operation of the system and is used to
change various settings during Menu Mode operation (refer to Section 6.5).
c. Grip Start Position Toggle Switch A/B: This switch allows the user to select between
one of two grip separation settings. This allows quick transition from one separation
length to another. Grip separations A and B can be set through the Menu Mode (refer
to Section 6.5).
d. Test/Yes/: This button is used to initiate a Test or in Menu Mode to navigate the
screen tree.
e. Return Enter: This button is used to return the grips after a test or in Menu Mode to
navigate the screen tree.
f. Stop/No/⇩: This button is used to stop a Test or in Menu Mode to navigate the screen
tree.
Pro-Tester Operator's Manual Page 8