Dell 6350 Rack Installation page 17

support.dell.com
& &
Before you install your computer in the rack, please read the "Safety Instructions"
found earlier in this guide.
"   '  
Although no tools are required to install the slide assemblies, the following items
make the installation easier:

A #2 Phillips screwdriver

An installation template, helpful in slide assembly placement and alignment

Masking tape or a felt-tip pen, for use in marking the mounting holes to be used
   " #
For instructions on installing the PowerEdge and PowerVault computers, see
"Installing the System in the Rack" found later in this guide.
The following subsections include instructions for performing the following tasks for
both PowerEdge and PowerVault computers:

Removing the doors from the rack

Installing the slide assemblies in the rack

Installing the computer in the rack

Installing the cable tray

Installing the cable-management arm

Reversing the cable-management arm installation

Replacing the rack's front and back doors
Rack Installation Guide 1-3