Honda CTX700 2016 Owner's Manual page 84

Engine Oil Changing Clutch Oil Filter
u
4. Install the new clutch oil filter with the
rubber seal facing in, toward the engine.
You will see "OUT-SIDE" mark on the
clutch oil filter body, toward the filter
cover.
5. Replace the O-ring and apply a thin coat
of engine oil to the new O-ring before
installing it.
6. Install the spring and the clutch oil filter
cover.
7. Install the clutch oil filter cover bolts and
tighten.
8. Apply a thin coat of engine oil to the
rubber seal of a new engine oil filter.
P. 80
2
9. Install a new engine oil filter and tighten.
Torque: 19 lbf·ft (26 N·m, 2.7 kgf·m).
82
10. Install the new sealing washer onto the
drain bolt. Tighten the drain bolt.
Torque: 22 lbf·ft (30 N·m, 3.1 kgf·m).
11. Fill the crankcase with the recommended
oil ( P. 59) and install the oil fill cap/
2
dipstick.
Required oil
When changing oil, engine oil
filter & clutch oil filter:
3.6 US qt (3.4 liters)
12. Check the oil level.
13. Check that there are no oil leaks.
14. Install the right under fairing.
P. 77
2