Honda CTX700 2016 Owner's Manual page 110

Tire Puncture
u
CTX700A/D only
When removing and installing the wheel, be
careful not to damage the wheel speed
sensor and pulser ring.
❙
Front Wheel
Removal
1. Place on a firm, level surface.
2. Cover right side of the front wheel and
brake caliper with protective tape or cloth.
Tape or
cloth
Brake Wheel speed sensor
caliper
CTX700A/D only
108
Removing Wheels
Pulser ring
CTX700A/D only
Mounting
bolts
Side collar
3. On the right side, remove the mounting
bolts and remove the brake caliper.
u Support the brake caliper assembly so
that it doesn't hang from the brake
hose. Do not twist the brake hose.
Avoid getting grease, oil, or dirt on the
u
disc or pad surfaces.
u Do not pull the brake lever while the
brake caliper is removed.
u Take care to prevent the brake caliper
from scratching the wheel during
removal.