Troubleshooting - Husqvarna QTB380W User Manual

7. Rotate the drain plug 180 degrees to
let the drain water flow into the tray.

10. TROUBLESHOOTING

WARNING!
Refer to Safety chapters.
10.1 What to do if...
There are sounds which may occur during the operation of the appliance
(e.g. bubbling, whirring, cracking or clicking), which are normal.
Problem
The appliance does not op-
erate.
The appliance is noisy.
"E0" symbol and current
temperature are displayed
alternately.
8. Clean the interior and dry it
thoroughly.
9. Switch on the appliance.
10. Set the temperature to higher setting
and close the lid. Wait two or three
hours before you reload previously
removed food into the appliance.
11. Set the temperature to the desired
setting.
Possible cause
The appliance is switched
off.
The mains plug is not con-
nected to the mains socket
correctly.
There is no voltage in the
mains socket.
The appliance is not suppor-
ted properly.
The appliance touches the
wall or other objects.
Temperature sensor failure.
Make sure the water does
not spill out of the tray.
Solution
Switch on the appliance.
Check if the appliance is
plugged correctly.
Connect the appliance to a
different electrical mains
socket. Contact a qualified
electrician.
Check if the appliance
stands stable. Refer to "In-
stallation/Location" chapter.
Slightly move the appliance.
Refer to "Installation/Loca-
tion" chapter.
Contact the Authorised
Service Center.
ENGLISH 31