Page 1
Hand controller and mount firmware upgrades (check online for the latest version) Packaging may change from time to time without notice. iOptron Corp. | 6E Gill Street | Woburn, MA 01801 USA | (781) 569-0200 | Toll Free (866) 399-4587 | www.iOptron.com...
Page 2
2x Azi Adjustment Screws. Remove the 2x Azi iOptron Corp. | 6E Gill Street | Woburn, MA 01801 USA | (781) 569-0200 | Toll Free (866) 399-4587 | www.iOptron.com...
Page 3
R.A. axis free before loading the CW. Remove the CW R.A. or DEC Gear Switch is disengaged. Always hold iOptron Corp. | 6E Gill Street | Woburn, MA 01801 USA | (781) 569-0200 | Toll Free (866) 399-4587 | www.iOptron.com...
Page 4
Download and install iPolar Software (first time use); Connect a mini USB cable between the iPolar and a computer USB port; iOptron Corp. | 6E Gill Street | Woburn, MA 01801 USA | (781) 569-0200 | Toll Free (866) 399-4587 | www.iOptron.com...
Page 5
(same as indicated on the HC LCD), as shown in the right side of the above figures. support@ioptron.com for technical supports. iOptron Corp. | 6E Gill Street | Woburn, MA 01801 USA | (781) 569-0200 | Toll Free (866) 399-4587 | www.iOptron.com...
Page 6
A. iOptron warrants your telescope, mount, or controller to be free from defects in materials and workmanship for two years. iOptron will repair or replace such product or part which, upon inspection by iOptron, is found to be defective in materials or workmanship. As a condition to the obligation of iOptron to repair or replace such product, the product must be returned to iOptron together with proof-of- purchase satisfactory to iOptron.
Need help?
Do you have a question about the G28ECA Series and is the answer not in the manual?
Questions and answers