Dell PowerVault 130T Installation Manual page 9

Storage system rack kit

Hide thumbs Also See for PowerVault 130T:

Table of Contents

Available languages

Installing the Cage Nuts in the Rack

The cage nuts are installed on both vertical-rail mounting holes located at 4.3 and

13 inches above the bottom of the adjustable rail (see Figure 1-5). Use the following

procedure to install the cage nuts in the rack.

13 inches

4.3 inches

Figure 1-5. Locations for the Cage Nuts

Insert the lower lip of the cage nut over the bottom of the opening in the back of

a rail as shown in Figure 1-6. Insert the small end of the cage-nut tool through the

opening in the rail (from the front) and hook the tool over the top lip of the cage

nut.

Dell PowerVault 130T Storage System Rack Kit Installation Guide

1-7

Table of Contents