Page 1
-- Revision History -- Release: A1.3 2006/02/08 -- Add Object IDs, re-define syntax and add variable for volume control -- This release is for 5100MP projectors manufactured after 10 Apr. 2006 with network firmware C1.3 IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Integer32, NOTIFICATION-TYPE, enterprises, Counter32,...
Page 3
MAX-ACCESS read-only STATUS current DESCRIPTION " A value which indicates the lamp hours of the projector, that is, the number of hours the lamp has been turned on since it was replaced. " ::= { dellMIB5100MP 3 } pjtTemperature OBJECT-TYPE SYNTAX INTEGER (0..255)
Page 4
" ::= { dellMIB5100MP 6 } pjtSourceButton OBJECT-TYPE SYNTAX INTEGER { m1RGB(113), m1DRGB(114), m1Component(115), vgaRGB(117), vgaComponent(118), bncRGB(120), bncComponent(121), rcaComponent(123), sVideo(125), composite(126), hdmi(127), noVideoSource(170) MAX-ACCESS read-write STATUS current DESCRIPTION " A command which indicates to search source for projection. 113: M1 RGB; 114: M1 DRGB;...
Page 5
SYNTAX INTEGER { zoomIn(1) MAX-ACCESS read-write STATUS current DESCRIPTION " A command which indicates to zoom in image, that is, to produce a larger projected image. " ::= { dellMIB5100MP 8 } pjtZoomOutButton OBJECT-TYPE SYNTAX INTEGER { zoomOut(1) MAX-ACCESS read-write STATUS current DESCRIPTION "...
Page 6
::= { dellMIB5100MP 10 } pjtHideButton OBJECT-TYPE SYNTAX INTEGER { imageHiddenToggle(1) MAX-ACCESS read-write STATUS current DESCRIPTION " A command which to hide/display image. " ::= { dellMIB5100MP 12 } pjtVideoButton OBJECT-TYPE SYNTAX INTEGER { modePC(0), modeMovie(1), modeGame(2), modeSRGB(3), modeUserDefined(4) MAX-ACCESS read-write STATUS current DESCRIPTION "...
Page 7
A command which indicates to increase horizontal keystone of the right side, that is, the right side of the trapezoid will become smaller relative to the left side. NOTE: If the projector is mounted upside-down, the effect of these keystoning commands will appear to be reversed.
Page 8
A command which indicates to increase vertical keystone toward the top, that is, the top of the trapezoid (relative to the projector body) will become larger relative to the bottom. NOTE: If the projector is mounted upside-down, the effect of these keystoning commands will appear to be reversed.
Page 9
OBJECT-TYPE SYNTAX INTEGER (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION " A value which sets the brightness of the projector. 0(zero) is minimum brightness; 100 is maximum brightness. " ::= { dellMIB5100MP 21 } pjtContrast OBJECT-TYPE SYNTAX INTEGER (0..100) MAX-ACCESS read-write...
Page 10
OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) MAX-ACCESS read-write STATUS current DESCRIPTION " The 1-st destination E-mail address which will receive alert message when the projector is error. " ::= { dellMIB5100MP 24 } pjtDstEmailAddr2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) MAX-ACCESS read-write...
Page 11
Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.