Factory Reset Menu; Computer Source Menu - Dell 5100MP User Manual

Factory Reset Menu

Computer Source Menu

NOTE:
This menu is only available connected to a computer.
NOTE:
Adjust the Frequency first and then the Tracking.
H . P —Press
OR OSITION
left and to adjust the horizontal position of the image to the right.
V . P —Press
ER OSITION
to adjust the vertical position of the image up.
F
ACTORY
projector to its factory default settings. Reset
items include both computer image and video
image settings
F
REQUENCY
frequency to match the frequency of your
computer graphics card. If you see a vertical
flickering bar, use Frequency control to
minimize the bars. This is a coarse adjustment.
T
RACKING
display signal with the graphic card. If you
experience an unstable or flickering image, use
the Tracking to correct it. This is a fine
adjustment.
to adjust the horizontal position of the image to the
to adjust the vertical position of the image down and
R —Select Yes to reset the
ESET
—Change the display data clock
—Synchronize the phase of the
Using Your Projector 33