Table of Contents
Advertisement
6300 Series Wall Mount Kit Installation Guide
Installation
The 6300 series wall mount kit can be used to mount your 6300 series analog phones to the wall in
one of two ways:
•
Directly to the wall
•
On top of an existing telco wall plate
Direct wall mount installation
To mount your phone directly to the wall:
1. Separate the Wall Mount Connector from the Wall Mount Base by pulling the Release Lever
(on the Wall Mount Connector) in and pulling the Wall Mount Connector up.
2. Locate the wall mount insertion area on the back of the phone (above the various jacks).
3. Carefully insert the Wall Mount Connector into the insertion area of your phone and slide the
Wall Mount Connector towards the right until it snaps in place.
3
2
1
---
7.5V
k
Advertisement
Table of Contents
