Telco Wall Plate Installation - Mitel 6300 Series Wall Mount Kit Installation Manual

Telco wall plate installation

To mount your phone on top of an existing telco wall plate:
1. Separate the Wall Mount Connector from the Wall Mount Base by pulling the Release Lever (on
the Wall Mount Connector) in and pulling the Wall Mount Connector up.
2. Locate the wall mount insertion area on the back of the phone (above the various jacks).
3. Carefully insert the Wall Mount Connector into the insertion area of your phone and slide the
Wall Mount Connector towards the right until it snaps in place.
4. Turn over your phone and locate the handset hook found in the handset cradle.
2 1
---
7.5V
k
Installation
8