Husqvarna K 770 Operator's Manual page 5

Product overview K 770 SmartGuard
1
4
3
2
12 11
13
1. Operator's manual
2. Air filter cover
3. Information and warning decal
4. Front handle
5. Combination wrench
6. SmartGuard
7. Front belt guard
8. Decompression valve
9. Belt tensioner
10. Rear belt guard
11. Air purge bulb
12. Fuel tank cap
13. Water connection with filter
14. Stop switch
15. Throttle trigger
16. Throttle lockout
17. Choke control
18. Cutting equipment decal
19. Flange, spindle, arbor bushing
20. Cutting blade (not supplied)
21. SmartGuard handle
22. Blade guard
23. Adjustment handle for blade guard
24. Water valve
25. Rear handle
26. Starter rope handle
27. Starter housing
28. Muffler
1447 - 001 - 16.04.2020
5
8
9
10
14
21
6
20
19
18
7
17
16
15
29. Water connector GARDENA
Symbols on the product
WARNING: This product can be dangerous
and cause serious injury or death to the
operator or others. Be careful and use the
product correctly.
Read the operator's manual carefully and
make sure that you understand the
instructions before you use this product.
Use approved protective helmet, hearing
protection, eye protection and respiratory
protection. Refer to
equipment on page 9 .
Dust forms when cutting. The dust can
cause injuries if inhaled. Use an approved
respiratory protection. Avoid inhaling
exhaust fumes. Always provide for good
ventilation.
WARNING! Kickbacks can be sudden, rapid
and violent and can cause life threatening
injuries. Read and understand the
instructions in the manual before using the
product. Refer to
22
23
24
27
26
25
29
®
Personal protective
Kickback on page 18 .
5