Dust Extraction; Template Follower - Westfalia WOF 1600 Original Instructions Manual

Dust Extraction

1. Inhalation of dust is dangerous
to your health. Wear a dust
mask and always work with an
attached
system.
2. To extract dust, connect the
suction hose of a vacuum
cleaner or
system to the flange of the
dust extraction adaptor.

Template Follower

The template
enables template and pattern
routing on workpieces. To
use the template follower
remove the two countersunk
screws from cut-out of the
base plate. Lay the template
follower into
Make sure the
follower faces
(arrow) and secure it with the
countersunk screws. Lay the
router with the
follower against the template.
Switch on the router. Loosen retaining lever (14) and slowly lower the router to
the workpiece until the adjusted depth-of-cut is reached. Re-tighten the
retaining lever (14).
Lead the router with projecting
template follower along the
template by applying light
sideward pressure.
Templates can be purchased
separately or you can design
your own templates.
detailed information on templates refer to a wood-working book.
Operation
dust extraction
dust extraction
follower
the cut-out.
template
downwards
template
For
19