Set Access Control - TP-Link RE300 User Manual

Chapter 5
• Select the Manual
only.
4. Click SAVE.
5 6

Set Access Control

Access Control allows you to permit or block specific devices from accessing the
internet for a specific period.
Note:
Access Control is not available when your range extender is in a OneMesh network, where it automatically synchronizes
network settings from your main router.
1. Visit http://tplinkrepeater.net
for the extender.
2. Go to Settings > Advanced Settings
3. Enable Access Control.
mode and choose to transmit 2.4GHz band or 5GHz band
and log in with your TP-Link ID or the password you set
> Access
Customize Your Network
Control.
28