Configure Wireless Network - TP-Link RE300 User Manual

Chapter 5
5 2

Configure Wireless Network

If you want to extend another main network after Quick Setup, you can refer to this
section. Moreover, you can change the wireless settings for your extended networks.
Visit http://tplinkrepeater.net, and log in with your TP-Link ID or the password you set
for the extender.
Note:
Here we take the configuration of the 2.4GHz network as an example. If the 5GHz network is available on your extender,
please refer to the instructions to set your 5GHz network.
• To extend another main network:
1. Go to Wireless > Connect to Host
2. Enable Connect to 2.4GHz Network
networks.
Note:
It is unable to change main network settings when the extender is in a OneMesh network.
3. Select the 2.4GHz network you want to extend.
Note:
If the network you want to extend is on but not listed, please try the following steps.
· Move the extender closer to your router, and click
· You can manually enter the SSID (network name) and password of the network you want to extend, and click SAVE.
4. Once a host network is selected, the SSID and security type will be automatically
filled in. If the selected network is encrypted, enter the password in the
field.
5. Click SAVE.
Network.
and click WIRELESS SCANNER
Refresh in the top-right corner of the list.
Customize Your Network
to find all available
Password
24