Related Manuals for CH Hanson Norse 9681119
Summary of Contents for CH Hanson Norse 9681119
- Page 1 9681119_oipm_En012_9643311.01 03/21/18 Page 1 Operating Instructions & Parts Manual Model 9681119 2 x 6˝ Belt and Disc Sander 9643311.01 0318...
- Page 2 9681119_oipm_En012_9643311.01 03/21/18 Page 2 NORSE Operating Manual & Parts List 9681119 Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage! retain instructions for future reference.
-
Page 3: Getting Started
9681119_oipm_En012_9643311.01 03/21/18 Page 3 NORSE Operating Manual & Parts List 9681119 GETTING STARTED Unpack: • Do not discard packing materials until after machine has been Structural Requirements inspected for damage and completeness. Locate loose parts Make sure all supporting structures and load attaching devices are and set aside. -
Page 4: Specifications
9681119_oipm_En012_9643311.01 03/21/18 Page 4 NORSE Operating Manual & Parts List 9681119 SAFETY RULES ( CONTINUED ) • Handle workpiece correctly. Protect hands from possible injury. • Turn machine off if it jams. Belt jams when it digs too deeply • Wear face mask or dust mask if operation is dusty. -
Page 5: Installation
9681119_oipm_En012_9643311.01 03/21/18 Page 5 NORSE Operating Manual & Parts List 9681119 ASSEMBLY Refer to Figures 1 through 3. Do not attempt assembly if parts are missing. Use this manual to order repair parts. Attach Abrasive Disc to Aluminum Disc 1. Remove dust chute by loosening screws and bolts. 2. -
Page 6: Power Source
9681119_oipm_En012_9643311.01 03/21/18 Page 6 NORSE Operating Manual & Parts List 9681119 INSTALLATION ( CONTINUED ) Green (or green and yellow) conductor in cord is the grounding wire. If repair or replacement of the electric cord or plug is Power Source necessary do not connect the green (or green and yellow) wire to a live terminal. -
Page 7: Operation
9681119_oipm_En012_9643311.01 03/21/18 Page 7 NORSE Operating Manual & Parts List 9681119 OPERATION 3. Replace lower guard and tighten bolt. 4. Replace belt cover and knobs. Operation of any power tool can result in 5. Rotate belt by hand to check tracking, belt should ride centered foreign objects being thrown into eyes on drive and tracking wheels. -
Page 8: Maintenance
9681119_oipm_En012_9643311.01 03/21/18 Page 8 NORSE Operating Manual & Parts List 9681119 OPERATION ( CONTINUED ) 3. Abrasive disc moves fastest and removes more material at outer edge. Contour Sanding 4. For accuracy, use the miter gauge. Refer to Figure 6, page 7. 1. -
Page 9: Troubleshooting Guide
9681119_oipm_En012_9643311.01 03/21/18 Page 9 NORSE Operating Manual & Parts List 9681119 TROUBLESHOOTING GUIDE Symptom Possible Cause(s) Corrective Action Motor will not start 1. Blown line fuse or tripped circuit 1. If fuse is blown, replace with fuse of proper size. breaker If breaker tripped, reset it 2. - Page 10 9681119_oipm_En012_9643311.01 03/21/18 Page 10 NORSE Operating Manual & Parts List 9681119...
- Page 11 9681119_oipm_En012_9643311.01 03/21/18 Page 11 NORSE Operating Manual & Parts List 9681119...
- Page 12 9681119_oipm_En012_9643311.01 03/21/18 Page 12 NORSE Operating Manual & Parts List 9681119 NORSE Warranty NORSE by C.H. Hanson warrants their products to be free of defects in material or workmanship. This warranty does not cover defects due directly or indirectly to misuse, abuse, normal wear and tear, failure to properly maintain the product, heated, ground or otherwise altered, or used for a purpose other than that for which it was intended.