Page 1
9681115_oipm_En012_9643069.01 0518 05/22/18 Page 1 Operating Instructions & Parts Manual Model 9681115 6˝ x 9˝ Belt/Disc Sander 9643069.01 0518...
Page 2
9681115_oipm_En012_9643069.01 0518 05/22/18 Page 2 NORSE Operating Manual & Parts List 9681115 Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage! retain instructions for future reference.
9681115_oipm_En012_9643069.01 0518 05/22/18 Page 3 NORSE Operating Manual & Parts List 9681115 GETTING STARTED Unpack: • Carefully unpack Sander from carton. Do not discard packing Structural Requirements materials until after machine has been inspected for damage Make sure all supporting structures and load attaching devices are and completeness.
9681115_oipm_En012_9643069.01 0518 05/22/18 Page 4 NORSE Operating Manual & Parts List 9681115 SAFETY RULES ( CONTINUED ) • Keep hands away from moving parts and sanding surfaces. • Never leave tool running unattended. Turn the power off and • Wear face mask or dust mask if operation is dusty. do not leave tool until it comes to a complete stop.
9681115_oipm_En012_9643069.01 0518 05/22/18 Page 5 NORSE Operating Manual & Parts List 9681115 ASSEMBLY 3. Slide the large fence’s two screws with knobs over the two slots in the small fence and fasten in place. Pending on the material being sanded, the large fence can easily be removed Do not attempt assembly if parts are by just loosening the two knobs and sliding it off the small missing.
9681115_oipm_En012_9643069.01 0518 05/22/18 Page 6 NORSE Operating Manual & Parts List 9681115 ASSEMBLY ( CONTINUED ) INSTALLATION The machine must not be plugged in and the power switch must be in the off position until all adjustments are complete. Mount Sander NOTE: Although compact, the sander is heavy.
Page 7
9681115_oipm_En012_9643069.01 0518 05/22/18 Page 7 NORSE Operating Manual & Parts List 9681115 INSTALLATION ( CONTINUED ) Adjusting Belt Assembly Position The sanding belt frame can be easily adjusted from a horizontal Adjusting Disc Table Angle position to a vertical position, or any other position to assist your sanding operation.
9681115_oipm_En012_9643069.01 0518 05/22/18 Page 8 NORSE Operating Manual & Parts List 9681115 INSTALLATION ( CONTINUED ) Where a 2-prong wall receptacle is encountered, it must be replaced with a properly grounded 3-prong receptacle installed in accordance with National Electric Code and local codes and All electrical connections must be ordinances.
9681115_oipm_En012_9643069.01 0518 05/22/18 Page 9 NORSE Operating Manual & Parts List 9681115 OPERATION ON/OFF Switch The ON/OFF locking switch needs to have the safety switch key inserted before the switch can be used. This feature prevents Operation of any power tool can result in foreign objects being thrown into eyes unauthorized use of the sander.
9681115_oipm_En012_9643069.01 0518 05/22/18 Page 10 NORSE Operating Manual & Parts List 9681115 OPERATION ( CONTINUED ) Changing the Sanding Belt 1. Remove the plastic side cover from the frame by unscrewing the knob. See Figure 15. Figure 16 Splice Direction Arrows Figure 15 Figure 17...
9681115_oipm_En012_9643069.01 0518 05/22/18 Page 11 NORSE Operating Manual & Parts List 9681115 OPERATION ( CONTINUED ) MAINTENANCE Make certain that the unit is Changing the Sanding Disc disconnected from power source before attempting to service or remove any component. Refer to Figure 19. Cleaning The sandpaper disc can be removed with the table installed, or with •...
Page 12
9681115_oipm_En012_9643069.01 0518 05/22/18 Page 12 NORSE Operating Manual & Parts List 9681115...
Page 13
9681115_oipm_En012_9643069.01 0518 05/22/18 Page 13 NORSE Operating Manual & Parts List 9681115...
Page 14
9681115_oipm_En012_9643069.01 0518 05/22/18 Page 14 NORSE Operating Manual & Parts List 9681115...
9681115_oipm_En012_9643069.01 0518 05/22/18 Page 15 NORSE Operating Manual & Parts List 9681115 TROUBLESHOOTING GUIDE Symptom Possible Cause(s) Corrective Action Motor will not start 1. Blown line fuse or tripped circuit 1. If fuse is blown, replace with fuse of proper size. breaker If breaker tripped, reset it 2.
Page 16
9681115_oipm_En012_9643069.01 0518 05/22/18 Page 16 NORSE Operating Manual & Parts List 9681115 NORSE Warranty NORSE by C.H. Hanson warrants their products to be free of defects in material or workmanship. This warranty does not cover defects due directly or indirectly to misuse, abuse, normal wear and tear, failure to properly maintain the product, heated, ground or otherwise altered, or used for a purpose other than that for which it was intended.