Table of Contents
Advertisement
global_main.book.book Page 32 Tuesday, August 18, 2020 1:40 PM
EN
32
TROUBLESHOOTING
Symptoms
E3
CLOTHES SENSING
ERROR
CL
CHILD LOCK FUNCTION
Noises
Symptoms
Rattling and clanking
noise
Thumping sound
Vibrating noise
Possible Cause & Solution
Sensor for clothes-sensing is defective.
• Manually redistribute the laundry if laundry have become tangled.
Motor's revolution is too low.
Contact-point of Connector is defective.
• Unplug the appliance and wait 60 seconds. Reconnect power and try
again.
is not an error. This prevents children from changing cycles or
CL
operating the appliance.
• Turn off the Child Lock function in the control panel.
Possible Cause & Solution
Foreign objects, such as keys, coins, or safety pins may be in the drum.
• Stop the appliance, check the drum for foreign objects. If noise continues
after the appliance is restarted, call for service.
Heavy laundry may produce a thumping sound. This is usually normal.
• If the sound continues, the appliance is probably out of balance. Stop and
redistribute the laundry.
The laundry may be out of balance.
• Pause the cycle and redistribute the laundry after the door unlocks.
Packaging materials are not removed.
• Remove packing materials.
The laundry may be unevenly distributed in the drum.
• Pause the cycle and redistribute the laundry after the door unlocks.
Not all levelling feet are resting firmly and evenly on the floor.
• See the section Levelling the Appliance to adjust and level the feet.
Floor is not rigid enough.
• Check if the floor is solid and does not flex. See the section Installation
Place Requirements to select the proper location.
Advertisement
Table of Contents
