Advertisement
Attaching the Wall Bracket
to Wooden Studs
Wooden studs run vertically inside the wall, 16 inches
apart, behind the drywall or plaster. The wall bracket
must be mounted to a wooden stud, or the bracket could
fall out and damage your display or cause personal harm.
Drywall
X
1.
Use a stud finder to locate the edges of the
wooden stud, and mark the center.
D
F
2X
2X
2.
Place the wall bracket template up to the
marked locations, and tape it to the wall. Use the
included bubble level to make sure the template
is level before drilling. Use a pencil to mark the
two drilling holes for the anchor screws, and then
apply a piece of tape over the marks.
G
H
1X
1X
X
X
9
Advertisement
