Advertisement
Attaching the Wall Bracket
to Concrete (cont.)
2. Use a 3/8-inch (10 mm) concrete drill bit to predrill
the marked spots 2.4 inches (60 mm) deep, and
then clean out the debris from the holes.
3/8-in.
2.4 in.
3.
Remove the template and Insert the concrete
anchors into the predrilled holes, and use a
hammer to tap the anchors into the concrete.
12
4.
Attach the bracket to the wall by inserting the
anchor screws through the washers and the
wall bracket's mounting holes, and screw them
into the anchors until secure. Do not overtighten
the screws.
Advertisement
