Advertisement
Attaching the Wall Bracket to
Wooden Studs (cont.)
3/16-in.
2.2 in.
3.
Use a 3/16-inch (4.5 mm) wood drill bit to
predrill the marked spots 2.2 inches (55 mm)
deep, and then clean out the debris from the
holes. Remove the template from the wall.
10
4.
Attach the bracket to the wall by inserting the
two anchor screws through the washers and
the wall bracket's mounting holes, and screw
them into the predrilled support holes until
secure. Do not overtighten the screws.
Advertisement
