VERDER CARBOLITE GERO HZS 12/900 Installation, Operation And Maintenance Instructions page 53

Key
HL Home List
IL Input List
OL Output List
AL Access List
1 Measured temperature; use arrow keys to access setpoint
2 Output power (read only)
3 Present only if SPrr in use
4 Manual/Auto (mAn = off, Auto = on)
5 Setpoint ramp rate OFF or value
6 Timer mode
7 Time remaining
8 Dwell time for timer
9 Timer status run or OFF
10 Enter password
11 If User Calibration
12 User 2-Point Calibration
13 Power limit setting, if present
14 For factory acess to lists and parameters not available to the operator
5.0 2132 Controller
53