Installing The Canopy; Installing The Blades - Hunter Neutron Installation Manual

1886
Note:
Fan style may vary.
7
Ceiling Bracket Hanging Fan

Installing the Canopy

Lift the canopy into place so that
the screw holes are aligned.

Installing the Blades

IMPORTANT
NOTE: Follow the instructions on the blade. Installing it
incorrectly could result in your fan not functioning.
Wiring Installing Fan Body
Insert the two canopy screws
found in the
Put the blade washers found in the
bag onto the blade screws found in the
hardware bag. Then install the blade screws to
secure each blade to the fan.
Repeat x3
Blades
hardware bag.
Canopy Screw
bag
hardware
x9
Blade Screw
bag
Blade Washer
bag
Light Remote
x2
x9
App