Dell Inspiron 7000 Reference And Troubleshooting Manual page 87

Select allows you to select individual test groups to tailor the testing process to your
particular needs. You can choose one or more test groups and run them sequentially
or individually. When you choose Select, five options are displayed: All, One, Clear
All, Key-Help, and Quit Menu.
To select all the test groups, highlight All in the Select menu, and press <Enter>. To
select an individual test group, either press the up- or down-arrow key to highlight the
test group and press the <Spacebar>, or highlight One in the Select menu and press
<Enter>.
To reverse a test group selection, highlight the test group and press the <Spacebar>.
To clear all selected test groups, select Clear All.
The Key-Help option displays a list of key controls available for the selected option.
The Quit Menu option returns you to the Main menu.
Most of the test groups consist of several subtests. Use the Subtest option to select
individual subtests within the test group(s).
When you select Subtest, many of the same options as those on the Main menu are
displayed: Run, Select, Options, Test Limits, About, Key-Help, and Quit Menu.
Each of these options is explained in the following subsections.
Run in the Subtest menu displays five options: One, Selected, All, Key-Help, and
Quit Menu. If you select One, only the highlighted subtest is run. If you choose
Selected, only the selected subtests are run. If you select All, every subtest in the
selected test group is run. (The subtests are run in the order they are listed.)
The Key-Help option displays a list of available key controls. The Quit Menu option
returns you to the previous menu.
Select in the Subtest menu allows you to select individual subtests to tailor the test-
ing process to your particular needs. You can choose one or more subtests from the
list. When you choose Select, five options are displayed: All, One, Clear All, Key-
Help, and Quit Menu.
To select all the test groups, highlight All in the Select menu, and then press
<Enter>. To select an individual subtest, either highlight the subtest and press the
<Spacebar> or highlight One and press <Enter>.
To reverse a subtest selection, highlight the subtest and press the <Spacebar>. To
clear all selected subtests, select Clear All.
The Key-Help option displays a list of available key controls. The Quit Menu option
returns you to the previous menu.
Running the Dell Diagnostics 4-7