Dell Inspiron 7000 Reference And Troubleshooting Manual page 51

Dell inspiron 7000: reference guide
Hide thumbs Also See for Inspiron 7000:
Table of Contents

Advertisement

An error message
The power indicator
The keyboard indicators
The diskette-drive access
indicator
The CD-ROM/hard-disk
drive access indicator
A series of beeps
An unfamiliar constant
scraping or grinding
sound when a drive is
accessed
The absence of a familiar
sound
NOTE: For the full name of an abbreviation or acronym used in this table, see the Glossary in the System User's Guide .
Looking at and listening to your computer is important in determining the source of a
problem. Look and listen for the indications described in Table 3-1.
If the problem is still not resolved, see the next subsection, "Setup Options."
NOTE: Before you begin any of the troubleshooting procedures, make sure the
Quiet Boot option is set to Disabled in the Main menu of the Setup program. See
Chapter 2, "Customizing System Features," for information on using the Setup
program.
See "Messages and Codes" found later in this chapter.
If the computer's power indicator does not come on, see "Troubleshooting a
Power Failure" found later in this chapter.
Press the <Num Lock> key, the <Caps Lock> key, and the <Scroll Lock> key to
toggle their respective indicators on and off in the status display panel. If the indi-
cators do not appear, run the Keyboard test group in the Dell Diagnostics (for
instructions, see Chapter 4, "Running the Dell Diagnostics").
The diskette-drive access indicator should appear in the status display when
data is accessed on the diskette drive. You can test this indicator by inserting a
diskette into the drive, typing dir a: at an MS-DOS prompt, and pressing
<Enter>. If the diskette-drive access indicator does not appear, see "Trouble-
shooting the Diskette Drive" found later in this chapter.
The CD-ROM/hard-disk drive access indicator should appear when data is
accessed on the CD-ROM drive or the hard-disk drive. You can test this indica-
tor by typing dir c: at an MS-DOS prompt and pressing <Enter>. If the
CD-ROM/hard-disk drive access indicator does not appear, see "Troubleshoot-
ing the Hard-Disk Drive" or "Troubleshooting the CD-ROM Drive" found later in
this chapter.
See "Messages and Codes" found later in this chapter.
Make sure the sound is not caused by the application program that is running.
The sound could also be caused by a hardware malfunction. See Chapter 5,
"Getting Help," for instructions on obtaining technical assistance from Dell.
When you turn on the computer, you can hear the hard-disk drive spin up, and
the computer tries to access the boot files from the hard-disk drive or the dis-
kette drive. If your computer does not boot, call Dell for technical assistance.
(See Chapter 5, "Getting Help," for instructions.) Otherwise, see Chapter 4,
"Running the Dell Diagnostics."
Troubleshooting Your Computer
3-5

Advertisement

Table of Contents
loading

Table of Contents