Keyboard - Dell Inspiron 5100 Owner's Manual

Remove the screw labeled "O" next to the memory module cover.
3
Press the lever next to the memory module connectors in the direction of the arrow on
4
the lever (towards the drive) to release the drive.
Pull the drive out of the bay.
5
Slide the new drive into the bay until the drive is fully seated.
6
Replace the screw that you removed in step 3.
7
Replace the memory module cover and screw.
8

Keyboard

Complete the instructions in "Before You Add or Replace Parts" on page 100.
1
Use a small flat-blade screwdriver or plastic scribe to lift the notched right edge of the
2
hinge cover, and pry the cover loose from the hinges and bottom case.
screw
lever
CD or DVD
drive
Adding and Re placing Parts
109