Care And Maintenance; Environmental Protection - Russell Hobbs 22890-56 Instructions Manual

PREPERATION
1. Use good quality, fresh, ripe, citrus fruit.
2. Wipe the fruit.
3. Turn the fruit on its side and cut in half with a sharp knife, to cut through the centres of the segments.
PRESSING
1. Plug the citrus press into the power socket.
2. Adjust the pulp control as desired. Setting it towards MAX will allow more of the pulp to mix with the
juice.
3. Using one half-fruit at a time, place the cut (flesh) side on top of the reamer and press it down.
4. The reamer will turn, pressing the juice out of the half-fruit.
5. Move the fruit around, to ensure that the reamer reaches all of the flesh.
6. When you stop pressing, the motor will stop.
7. Do the same with the rest of your fruit.
8. Don't use the citrus press continuously for more than 2 minutes. After 2 minutes use, let it rest for 2
minutes before carrying on.
9. When you've finished, disassemble, clean, and store it away.
10. The cable can be stored wrapped around the motor unit.

CARE AND MAINTENANCE

1. Unplug the citrus press.
2. Wipe outer surfaces with a damp cloth. If necessary, use a little washing-up liquid.
3. Wash the removable parts in warm soapy water, rinse well, and dry.
¬ You may wash these parts in the top rack of a dishwasher.
• The extreme environment inside the dishwasher can affect the surface finishes.
• Don't put the motor unit in water or any other liquid.
• Don't use harsh or abrasive cleaning agents or solvents.
W

ENVIRONMENTAL PROTECTION

To avoid environmental and health problems due to hazardous substances in electrical and
electronic goods, appliances marked with this symbol mustn't be disposed of with unsorted municipal
waste, but recovered, reused, or recycled.
4