Dell Inspiron 2000 Reference And Troubleshooting Manual page 60

4-4 Dell Inspiron 2000 System Reference and Troubleshooting Guide
NOTE: If a Version Conflict dialog box appears at any time during this procedure, click
OK and continue with the procedure.
1. Insert your System Software CD into the CD-ROM or DVD-ROM drive.
Click Start, click Run, and type

2.
DVD-ROM drive letter) in the Run dialog box.
3. Click Next at the Welcome screen.
4. Read the Information screen and click Next.
The system setup program checks to see if you need an operating system update
before installing the drivers.
5. If the system setup program launches the Operating System Update program,
click OK and then follow the screen prompts to complete the update. You may
need to click OK to reboot the system several times during this process. When
the system stops prompting you to reboot, repeat steps 2, 3, and 4.
6. At the Setup Type dialog box, highlight the level of installation you desire:
Core Drivers — includes the audio, video, touch pad, modem, local area net-
work (LAN), and MS-DOS CD-ROM drivers.
All Drivers and Applications — includes the core drivers plus other applica-
tion programs such as the Yamaha Software Wavetable, Softex BayManager,
your computer's system Help, and various system utilities.
Custom — lists all available drivers, applications, and utilities. To perform a
custom installation, click Custom and then click the radio button for each
item you want to install.
7 . Click Next to view a list of the files that will be installed; then click Next again.
The selected files are copied to your hard-disk drive in preparation for installation.
8. Read the Information dialog box and click OK.
The Windows driver QuickInstall screen appears and driver installation begins.
  
9. At the Restarting Windows dialog box, click the Y es radio button and then click
OK to restart the computer.
10. If an Add New Hardware Wizard dialog box appears, click Next and follow the
screen prompts, accepting all defaults.
11. If you are prompted to insert your Windows operating system CD, remove the
System Software CD, insert the Windows CD, and click OK. If after doing this you
are prompted again to insert the CD, click OK to continue the installation.

 
(where d is your CD-ROM or