Boot Menu - Dell Inspiron 2000 Reference And Troubleshooting Manual

↑↓ ↑↓
↑↓ ↑↓
↔ ↔ ↔ ↔
support.dell.com
&   
Resume Time Resume Time appears on the screen only when Resume
On Time is set to On.
Lets you specify a time when the computer resumes from
standby mode to normal operation. To use this option, you
must set Suspend Mode to Save to RAM.
Auto Dim Extends battery life by setting the computer to automatically
decrease the brightness of the display when running on bat-
tery power. Options are Enabled (the default) and Disabled.
Lid Close Specifies how the computer will respond when the display
lid is closed. When set to Active (the default), the computer
switches the display image to an attached monitor. When
set to Suspend, the computer enters standby mode.
NOTE: For the full name of an abbreviation or acronym used in this table, see the Glossary in the
system Help.
See Figure B-6 and Table B-6 for an explanation of the options and settings for the
Boot menu. To select the boot device, press the up- or down-arrow key; then press
<F6> or <+> to move the device up the list, or press <F5> or <-> to move the device
down the list.

 


Using the System Setup Program B-13
↑> <↓