Polygroup TG76M4244C09 Assembly Instructions

TREE ASSEMBLY INSTRUCTIONS
Congratulations on purchasing your new tree from
Quick Set® and Quick Fold TM
Carefully follow the instructions below on how to quickly and easily set up your new tree.
1. Before you start to assemble your tree, choose an appropriate location near a wall outlet.
2. Assemble the tree stand and place on a level surface. (See Fig. A)
Fig. A - Tree Stand Assembly
Fig. B - Tree and Light Assembly
Section 1
3. Each tree section is numbered with a tag. Please identify all sections before assembling.
4. Assemble the tree from bottom to tree top. Start with the bottom section and remove the protective
cap before inserting into the assembled stand. Make sure the pole is firmly inserted and secured into the
stand.
SET UP
1
Section 2
Section 3
Section 1
Remove tree stand and tree sections
from box.
MODEL #: TG76M4244C09 / TG76M4244C11
Polygroup®!
technology to make set up and storage quick and easy.
Section 3
Section 2
2
Insert Section 1 into the tree stand.
This tree features
Please scan code to
learn how to shape
and set up your tree
Unfold the legs and lay the
stand in a flat area. Then slide
the locking disc downward and
snap into place.
*Electrical Rating For The Tree
(For Indoor Use Only)
2.72A 120V 60Hz
Do Not Tamper
Internal Parts
Open the
protective
cover
Do Not Tamper
Internal Parts
Open the
protective
cover
Insert
Green Label
Plug Into Wall
Outlet
3
Cinch Clip
B
C
Cinch
A
PULL HERE
Handle
A. Locate "Pull Here" tab and
corresponding Cinch Handle
B. Hold Cinch Clip firmly with one hand
and press down on clip
C. With Cinch Clip depressed, pull clip
away from tree until all branches are
released