Advertisement
Quick Links
NEED HELP?
DO NOT RETURN TO STORE. PLEASE VISIT US AT:
www.polygroupstore.com
TREE ASSEMBLY INSTRUCTIONS
Congratulations on purchasing your new tree from
up your tree in less than 10 minutes! Carefully follow the instructions below on how to quickly and easily set up your new tree.
1. Before you start to assemble your tree, choose an appropriate location near a wall outlet.
2. Assemble the tree stand and place on a level surface. (See Fig. A)
Fig. A - Tree Stand Assembly
Fig. B - Tree and Light Assembly
Section 1
3. Please identify all sections before assembling.
4. Assemble the tree from bottom to tree top. Start with the bottom section and remove the protective cap before inserting into the assembled
stand. Make sure the pole is firmly inserted and secured into the stand.
5. Continue by inserting the upper tree section(s) to the lower section(s) until inserting the tree top.
6. Allow branches to fall into place or gently pull up and out. When adjusting branches, be sure that all wires are free of branch hinges.
7. Just plug the adapter (connecting with the tree power cord) into the wall outlet (See Fig. B), your entire tree should now be lit. If some
bulbs do not light or flickers, search for any loose plugs and/or broken, loose or missing bulbs. Replace bulbs promptly in order to
maintain the performance and life expectancy of your pre-lit tree.
8. Begin to shape the branches and tips working from the bottom to the top. Start with tips farthest from the pole and fan out one to the right,
one to the left and one at the center of the main stem.
Fig. C
Top view
MODEL #: TG46M2251D00 SKU: 088-575
1-888-919-0070
OR
Polygroup®!
Tree top
(See Fig. C)
Side view
This tree comes with Quick Set® technology-Set up and light
Unfold the legs and lay the
stand in a flat area. Then slide
the locking disc downward and
snap into place.
*Electrical Rating For The Tree
(For Indoor Use Only)
Input: 120V AC, 60Hz, 0.16A
Output: 29V DC, 0.28A
Do Not Tamper
Internal Parts
Open the
protective
cap
Control box
Insert Green
Label Extension
Cord into Adapter
1
Adapter
To Be Plugged
Into Wall
Outlet
Advertisement
Related Manuals for Polygroup TG46M2251D00
Summary of Contents for Polygroup TG46M2251D00
- Page 1 8. Begin to shape the branches and tips working from the bottom to the top. Start with tips farthest from the pole and fan out one to the right, one to the left and one at the center of the main stem. (See Fig. C) Fig. C Side view Top view MODEL #: TG46M2251D00 SKU: 088-575...
- Page 2 9. After shaping the entire tree following the previous step, slightly upsweep all branch tips for a uniform look. Shift branches to fill any gaps. Your Christmas tree is now complete and ready to be decorated. STORAGE INSTRUCTIONS 1. Unplug adapter from the wall outlet first and then remove all ornaments and decorations. 2.
- Page 3 WARNING 1. Dispose used battery properly. observe local regulations regarding disposal of hazardous waste. 2. Ensure the batteries are installed correctly with regard to polarity (+ and -). 3. This product is powered by a lithium battery. Due to their small size, lithium batteries can easily be swallowed by children. Ingestion of such batteries has been known to cause death.