Installing A Floppy Drive And Reattaching Cables - Dell OptiPlex GX240 User Manual

132
I n s t a l l i n g U pg r ad e s

Installing a Floppy Drive and Reattaching Cables

Small Form-Factor Computer
Snap the replacement floppy drive into the sled and ensure that it is
1
secure in the sled.
Gently slide the floppy drive into the computer until the tabs securely
2
click into position.
Connect the interposer board to the floppy drive.
3
Slide the drive cable into the connector.
a
Close the lever so that the cable is secure in the connector.
b
Line up the hole on the bottom of the interposer board with the
c
notch on the connector, and snap the interposer board onto the
drive.
Attach the power cable to the interposer board on the floppy drive.
4
Attach the CD/DVD drive cable and the power cable to the CD/DVD
5
drive.
Connect the floppy-drive cable to the DSKT connector on the system
6
board.