H a r d D r i v e R e m o v a l
If the replacement drive does not have the bracket rails attached,
3
remove the rails from the old drive by removing the two screws that
secure each rail to the drive.
Replacing the Hard Drive
NOTICE:
To avoid possibly damaging the drive by ESD, ground yourself by
touching an unpainted metal surface on the back of the computer.
NOTICE:
When you unpack the drive, do not set it on a hard surface, which
may damage the drive. Instead, set the drive on a surface, such as a foam pad,
that will sufficiently cushion it.
Gently slide the drive into place until you hear it securely click.
1
Connect the power cable to the drive, and connect the IDE data cable
2
to the drive and the IDE1 connector on the system board.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 9 / 2 6 / 0 2
FILE LOCATION: S:\SYSTEMS\Meteor\SM\A03\drives.fm
79
Drives