Small Desktop Computer - Dell OptiPlex GX240 Service Manual

Disconnect the front I/O cable from the front-panel connector on the
3
system board (see "System Board
front-panel connector and see
location of the control panel and I/O cables).
Remove all cables that are connected to the front I/O panel.
4
From inside the computer cover, remove the mounting screw that
5
secures the front I/O panel to the computer.
Remove the front I/O panel from the computer.
6

Small Desktop Computer

Remove the hard-drive
1
Disconnect the hard-drive data cable.
2
Disconnect the control panel cable from the control panel connector
3
on the I/O panel.
Disconnect the front I/O cable from the front-panel connector on the
4
system board (see "System Board
front-panel connector and see
location of the control panel and I/O cables).
Note the routing of the control panel cable as you remove it from the
computer so that you can replace it correctly.
Components" for the location of the
"Small Form-Factor
shroud.
Components" for the location of the
"Small Desktop Computer" for the
Computer" for the
113
I / O Pa n e l