Figure 4-7 Message When A Request For Disconnecting The Drive In Drive Bay1 - Hitachi HF-W6500 45/40 Feature Manual

4. CHECKING THE HARDWARE STATUS
NOTE
• A disconnected drive cannot be set back to online and used again. When you
disconnect a drive, make sure that the correct drive is selected to be
disconnected.
• Note that if "User Account Control" (UAC) is disabled and a user without
administrator privileges clicks OFFLINE, the following message will be
displayed and the drive will not be disconnected. When you need to
disconnect a drive, log on to the computer using an administrator account and
click OFFLINE.

Figure 4-7 Message when a Request for Disconnecting the Drive in Drive Bay1

• You cannot disconnect a drive from a remote session.
7. Refresh button
If you click this button, the latest hardware status is acquired and the information in
the window is refreshed.
8. OK button
Click this button to close the Hardware status window.
is Rejected.
4-10